facebookpixel
Call Us: 727-228-2026

Window tinting in Tampa Bay runs $225 to $650 for most vehicles, depending on how many windows you do and what you drive. Two front windows start at $225. A full sedan — sides and back glass — is $450. An SUV is $550 to $650 because there is simply more glass. Those are Conforti’s prices for ceramic film, professionally installed in Palm Harbor.

Quick answer: most drivers spend $225–$650. Fronts only is the cheap entry point at $225. Full sedan $450. Full SUV $550–$650. Add a windshield or sunroof and it goes up from there.

Want a firm number for your exact vehicle? Call (727) 228-2026.

Window tint prices in Tampa Bay

What you’re tintingPriceNotes
Two front windowsFrom $225The most common add-on. Matches factory-tinted rear glass.
Sedan — sides and back$450Full job on a four-door.
SUV or truck — sides and back$550 – $650More glass, and larger back windows are harder to lay flat.
Windshield$225Full clear or light ceramic. Biggest single upgrade for heat.
Sunroof$150 – $300Varies with size. Panoramic roofs sit at the top.

Prices are for professionally installed ceramic film in Palm Harbor and the surrounding Tampa Bay area, current as of 2026. Your vehicle may quote differently — call and we will give you a firm number.

What actually changes the price

Three things move the number, and only one of them is the film.

  • How much glass. This is most of it. An SUV has more window area than a sedan, and the back glass is bigger and more curved, which takes longer to lay flat without creases.
  • How many windows. Fronts only is the entry point. Adding the windshield or a panoramic sunroof are each their own job.
  • Whether old film has to come off. Removing failed tint is slow, careful work — especially on rear glass with defroster lines, which are easy to damage and expensive to fix. Budget extra time if your current tint is purple or bubbling.

What does not drive the price much is how dark you go. A 5% and a 35% cost the same to install. Darkness is a preference, and in Florida it is also a legal limit — see what tint percentage is legal in Florida before you decide.

Why ceramic film costs more, and when it is worth it

Cheap tint exists. You have seen it on the road: purple, bubbling, peeling at the edges. That is dyed film breaking down under UV, and in Florida it happens fast.

Ceramic film does not use dye to get its color, so it does not turn purple. It rejects far more infrared heat, which is the part you actually feel on a July afternoon. And it does not interfere with phone, GPS, or keyless entry signals the way older metallic films did.

The honest tradeoff is upfront cost. The honest counter is that ceramic does not need doing twice. On a car you plan to keep, one good install beats two cheap ones. We go deeper on this in ceramic vs dyed window tint.

Darker does not mean cooler

Heat rejection is the reason most people in Tampa Bay tint, and it is worth knowing where it comes from.

Darkness blocks visible light. It does very little for infrared, which is the wavelength that carries heat. A quality ceramic film at a legal 35% will keep a car cooler than a cheap dyed film at 5%, while staying legal on your front windows and remaining easy to see out of at night.

If your goal is a cooler car rather than a darker one, put the money into the film, and put the windshield on your list. It is the largest piece of glass on the vehicle and the biggest single heat gain.

Vj0heJ9WR8

Frequently Asked Questions

Two front windows start at $225. A full sedan, meaning sides and back glass, is $450. An SUV or truck is $550 to $650. A windshield is $225 and a sunroof runs $150 to $300 depending on size. Those are ceramic film prices, professionally installed.
More glass and harder glass. An SUV has greater total window area, and the larger, more curved rear window takes more time and skill to lay flat without creasing. It is labor, not film cost.
No. A 5% and a 35% cost the same to install. Darkness is a preference and, in Florida, a legal limit. What changes the price is the amount of glass and the quality of the film.
It depends on how badly the film has failed and whether the rear glass has defroster lines, which have to be protected. Old, baked-on tint takes real time to remove cleanly. Bring the car by and we will quote it after seeing it.
A typical car takes two to four hours. Let the film cure for a few days before rolling the windows down, and expect slight haze or small water pockets while it dries out. Both clear on their own.
For most people here, yes. Ceramic rejects significantly more infrared heat and will not fade to purple the way dyed film does under Florida UV. If you are keeping the car more than a couple of years, it is usually the cheaper choice in the long run.

Get a firm window tint quote for your vehicle.
Call (727) 228-2026 — Conforti Auto & Marine Detailing, Palm Harbor, FL.

Share the Post:

Trusted paint protection film and ceramic coating specialist serving Palm Harbor and the Tampa Bay area.

Expert Insight

Tip from Jeremy: In Florida, long-term protection matters. UV exposure, road debris, water spotting, and regular washing all add up over time. The right combination of PPF, ceramic coating, and proper maintenance can preserve both appearance and resale value.